The influence factors of the spindle of the surface grinder
The spindle on the surface grinder is also a very important and vital part. If it can not work normally, it will seriously affect the normal operation of the grinder, so it is very important. So in general, what causes or elements will affect the normal operation of the grinding machine spindle? Next, in response to this question, the editor will give a detailed answer, so that you can learn to understand clearly.
Large grinder processing
The causes or elements that may cause the spindle of the surface grinder to fail to operate normally are as follows:
Reason 1:
The material of the spindle itself, its rigidity does not meet the requirements, and there is no quenching treatment in the manufacturing process, so that it has abnormal noise in the use process.
Reason two:
The front-end bearing of the main shaft is damped due to water inflow, so it is rusted or corroded, which seriously affects its dynamic balance, etc.
Reason three:
There are too many feeds for the spindle, which makes it sway, thus affecting its dynamic balance, etc.
-
02-20
What is the most important parameter in CNC machining of Jiangmen?
We usually do CNC, no matter which programming software you use, no matter which version you use, in the final analysis, we are setting the following parameters.1: The cutting depth is the cutting dep
-
02-20
Cleaning steps of lubricating device of CNC milling machine
Many parts of the lubricating device of CNC milling machine need to be cleaned regularly. The specific cleaning methods are as follows. (1) Cleaning method of oil rope and felt. Oil rope and linole
-
02-20
How to choose the right cutting tool for Jiangmen CNC machining
How to select cutting tools reasonably in Jiangmen CNC machining The selection of cutting tools is carried out under the condition of human-computer interaction of NC programming. The tool and hand
-
02-20
What are the rust removal methods of Jiangmen CNC machining precision parts
The machining of fine parts or parts, such as bearings, etc. will produce embroidered corrosion due to improper storage conditions or rust prevention, which can not be treated by mechanical method at